What Churches Actually Do About Copyright

Because “we’ve got CCLI, right?” isn’t quite the full story.

A few months ago, a property manager — let’s call him Zephaniah — sent a message through the Diaconate of Church Technologists website.

“There seems no ‘generic’ copyright agency for YouTube — unlike CCLI.  The implication is to contact the original creator.  Easy to say, nearly impossible to do.  What do other parishes do?”

It’s the sort of question that lands in church inboxes everywhere: earnest, sensible, and hiding a small storm behind it.  Because every congregation that’s ever dropped a YouTube clip into worship has quietly wondered the same thing: surely everyone else does this too — so it must be fine … right?

A can of legal worms

When I finally replied, I had to confirm Zephaniah’s worst suspicion.  There’s no magic licence that lets you stream or re-use YouTube videos in worship.  Not CCLI, not OneLicense, not any of the “we’ve paid for it, so we can use it” myths that circulate around sound desks and vestry tables.

The only safe way is explicit permission from the creator — and, yes, that’s about as practical as it sounds.  You can send the message, but there’s no telling whether you’ll ever get a reply before Sunday.  Or Lent.

The weary truth

Zephaniah wrote back a few days later with the kind of honesty that makes you both laugh and sigh.

“There is no quick way of resolving YouTube licensing.  I contacted a creator once; they responded two months after we wanted to use the material.  I suspect we will continue to be illegal where we can’t resolve the issue.”

He added, hopefully, that their livestreams are unlisted on Vimeo, private except for public events like funerals.  Which is better than nothing — but still not the iron-clad legal defence we’d all like to imagine.

And there it is: the lived reality of church copyright.  Not rebellion, not carelessness — just the ongoing collision between pastoral urgency and publishing law.  The desire to make worship beautiful this Sunday colliding with a system that moves at the speed of email.

“Private enjoyment” isn’t public ministry

At the heart of it all is one deceptively simple rule: once other people can see or hear something through you, you’ve entered the world of publishing — and publishing requires permission.

That means:

• A hymn lyric on a PowerPoint slide = fine if covered by your CCLI licence.
• The same lyric in a recorded or streamed service = not fine without the streaming add-on.
• A YouTube video played in-person to your congregation = probably illegal unless the creator has given permission for public performance.
• Downloading that clip, trimming it, and embedding it in your stream = definitely illegal.

The line between “private enjoyment” and “public use” isn’t blurry — it’s just routinely ignored, mostly by people trying to do the right thing in impossible timeframes.

Why it happens

Churches run on volunteers, goodwill, and looming Sundays.  The worship team plans something inspiring; the tech volunteer finds a video that fits; someone says, “Can’t we just play it?” There’s a moment of hesitation, then a collective shrug, and away we go.

It’s not malice; it’s maths.  Getting permission can take weeks.  Sunday happens every seven days.

And yet, as streaming has turned every service into a potential broadcast, the stakes have quietly risen.  A forgotten YouTube credit, a background track in a recorded funeral, a borrowed lyric sheet — each one is a breadcrumb trail leading back to a potential infringement notice.  Enforcement is rare, but not impossible — and when it hits, it’s unpleasant.

Five common myths (and quick reality checks)

“We’ve got CCLI, so we’re covered.”
Maybe.  CCLI offers different levels of coverage, and the right combination can include streaming rights — but many churches either don’t have that tier or don’t understand what it includes.  If you can’t say exactly what your licence covers, you probably aren’t covered.
“It’s okay if it’s unlisted.”
Privacy settings reduce visibility, not liability.  “Unlisted” is still public distribution in legal terms.
“Everyone does it.”
Everyone also parks badly outside the church hall.  Popularity isn’t legality.
“It’s ministry, not commerce.”
Copyright law doesn’t distinguish motive.  Whether you’re saving souls or selling soap, permission still matters.
“No one’s complained yet.”
That’s not the same as permission.  It just means you’ve been lucky so far.

So, what can we actually do?

Use authorised material.  Stick to content explicitly licensed for worship or under Creative Commons terms.
Ask early.  If you really need a specific video or piece of music, contact the creator long before you build the service around it.
When in doubt, leave it out.  Or, better still, use a short “Paused for copyright compliance” slide — a small act of integrity and a guaranteed congregation chuckle.
Check your hire agreements.  If you rent your venue for concerts or community events, make sure the hirer carries responsibility for any copyright issues.

None of this will make your services less creative.  If anything, it might push us toward more original storytelling, live music, and community-made video — things the algorithm can’t flag.

A note of grace

Most churches aren’t trying to cheat the system; they’re trying to tell stories well.  But perhaps it’s time to treat copyright not as a bureaucratic nuisance but as a form of neighbour love — respecting the people whose words, melodies, and images make our worship richer.

As one worship leader put it to me:
“We want people to meet God, not lawyers.”

Fair enough.

Join the conversation

If this all feels uncomfortably familiar, you’re in good company.  On 19 November, the Diaconate of Church Technologists (d|c|t) is hosting an open Q&A with CCLI — an Ask Me Anything for the faithful and the frazzled alike.

It’s not one narrow topic.  Bring the messy questions — about text, video, livestreams, lyrics, background music, or anything that’s made you hesitate before pressing Play.  We’ll unpack what’s legal, what’s pastoral, and what’s simply worth doing better.

No guarantees of quick fixes — but plenty of honest answers, and maybe a few laughs along the way. To learn more or register, click here for more information.

Because when it comes to church copyright, pretending “everyone does it” isn’t discipleship.  It’s just wishful thinking — and Sunday’s coming again.

What are Your AI Stories?

PS: d|c|t is also collecting stories for our upcoming Church+AI resource.  If you’ve experimented with AI for rosters, sermons, or parish admin — or simply bumped into its challenges — we’d love to hear from you: dct.org.nz/church-ai.

Peter Lane is Principal Consultant at System Design & Communication Services and has over 30 years of experience with Technology systems.    We invite your questions, suggestions and ideas for articles.   These can be submitted either through the editor or by email to dct@dct.org.nz We also operate a website focused on building a community of people interested in improving how we use technology in churches, located at dct.org.nz.

Cartoon of stressed-out church volunteer managing tech at Sunday service

“Help! I’m the Church Techie Now”

A Survival Guide for the Suddenly Responsible


Congratulations!  You made eye contact at the AGM and now you’re in charge of “the sound thingy”.  Or someone saw you plug in a laptop once and assumed you could livestream a funeral.  However it happened, you’ve been drafted into the sacred, mysterious world of Church Tech — where no two cables are the same, and the Holy Spirit is sometimes blamed for dodgy Wi-Fi.

You’re not alone.

Across the country, small churches are running on the goodwill of volunteers who didn’t ask to become AV wizards but said “yes” because no one else would.  These are the accidental techies: the schoolteachers, engineers, students, grandads, and organists-turned-camera-operators holding things together with gaffer tape and prayer. If that’s you — welcome.  You’re in good company.

And Church Tech is more than just sound and slides.  It includes livestreaming, websites, projectors, computers, Wi-Fi, email lists, Facebook pages, CCTV, alarm systems, and that weird digital signage in the foyer that no one knows how to update.  If it’s got power and a password, odds are it’s landed on your to-do list.

Here’s what you need to know.


1. You don’t need to be an expert — you just need to care.

The tech world loves jargon. But church tech doesn’t need to be rocket science. You don’t have to know the difference between balanced and unbalanced audio or be fluent in HDMI arcana.  What you do need is a cool head, a willingness to learn, and a sense of humour when the data projector decides it needs a firmware update during the opening hymn.

2. Reliability beats flashiness every time.

It’s tempting to chase after the slick livestreams you see from megachurches on YouTube.  Don’t.  Their pizza budgets could fund your entire parish for five years.  Focus instead on reliability and clarity.  If the microphones work, the slides show up, and the people at home can hear what’s going on — you’re doing well.  Resist the urge to “upgrade” things you haven’t fully understood yet.  Shiny gear is not holy.

3. Documentation is love.

Write down what works.  Take photos of the cable setup.  Label things.  Create a Sunday checklist.  Imagine you have to explain your whole system to someone who’s never seen a computer before — because one day, you will.  Every bit of clarity you create now is a gift to the next accidental techie.

4. You are allowed to ask for help.

Just because you’re the “tech person” doesn’t mean you have to do it alone.  Bring someone younger in and show them the ropes (they won’t know what VGA is, and that’s OK).  If a job is outside your comfort zone — like replacing the sound desk or reconfiguring the burglar alarm — it’s fine to suggest calling in an expert.  Tech is ministry, not martyrdom.

5. Perfection isn’t the goal — participation is.

Yes, things will go wrong.  Yes, your livestream will have that one week where the sound cuts out and the pulpit mic picks up someone coughing in the third pew.  Keep going.  Church tech isn’t about performance — it’s about removing obstacles between people and the worship they came for.  If you help one person feel connected, included, or able to hear the gospel clearly, then that’s a win.


What’s next?

This is the first in a series of articles for people like you — the brave souls holding the HDMI cable in one hand and a worship folder in the other.  We’ll cover practical topics like livestreaming on a shoestring, avoiding Sunday morning tech disasters, and what that confusing sound desk actually does.

In the meantime, if you’d like something a little more structured and slightly less sarcastic, check out dct.org.nz — we are planning a new project offering plain-English guides for small churches trying to keep the faith and the internet connection.

And if you’re stuck or overwhelmed, just ask for help.  d|c|t is here to support you — and your cables.

God bless your cables, your coffee, and your ability to find that one adapter that always goes missing right before communion.  You’ve got this!


Peter Lane is Principal Consultant at System Design & Communication Services and has over 30 years of experience with Technology systems.  We invite your questions, suggestions and ideas for articles.  These can be submitted either through the editor or by email to dct@dct.org.nz.  We also operate a website focused on building a community of people interested in improving how we use technology in churches, located at dct.org.nz.   

3 tips for better Livestreams: Good cameras for Live Streaming

Welcome to the final instalment of our series, offering valuable tips for live-streaming your church services.  We hope you’ve already witnessed significant improvements in your live streams by implementing our previous tips on enhancing audio and lighting.  If you were really keen, you might have even explored our bonus tip on network connections available only on the d|c|t website.  Today, we’ll delve into another crucial aspect of streaming: the camera.

All digital video cameras essentially operate the same way: they capture light through a lens, focus it on a digital sensor composed of individual pixel sensors, and convert the electronic output into a video signal, typically at 50 or 60 frames per second.  However, not all cameras are created equal for streaming purposes.

While it’s true that you can use a phone, a laptop camera, or a webcam for streaming, it’s important to consider how they are used, which is optimized for close-up shots of individuals at a distance of about ½ to 1 meter from the camera.  This differs significantly from the requirements of a worship setting, where you need to capture a mix of wide, contextual shots of the church sanctuary and medium to close shots of key locations, such as the lectern, the altar, or the organist.  While your phone or laptop may suffice for a basic setup to get started and may still have a role for specific special-purpose shots, to elevate your live-streaming experience, it’s worth investing in a high-quality camera optimized for live streaming.

Let’s explore some examples. Cameras with 4K or near-4K resolution, capable of recording to memory cards and streaming, and produced by industry-standard manufacturers, offer impressive features. The cameras pictured above are budget-friendly versions of cameras designed for broadcast and professional video production.  However, they might not be the ideal choice for traditional churches looking to live-stream worship services.

To use these cameras effectively, you’d need to place them on tripods.  Placing a camera on a tripod in the middle of an aisle with cables running to a computer isn’t the most elegant solution and can pose safety concerns, especially when dealing with multiple cameras.  Cabling can also be complex, requiring specialized cables and adaptors.  Additionally, each camera demands a dedicated operator, potentially obstructing the views of the congregation.  Finding skilled volunteers can be a challenge, and the setup and teardown process for each use can lead to operational errors.

While these cameras can be valuable for scenarios that require high-quality video, flexibility in positioning, and creative angles, they might not be the best choice for your primary camera.

Instead, consider PTZ (Pan, Tilt, and Zoom) cameras as a simpler and more practical solution for worship streaming.  These cameras, originating from video-conferencing systems, are optimized for streaming needs.  They are compact and can be discreetly mounted on walls or ceilings.  With remote control capabilities, you can eliminate the need for camera operators at the camera location.  Some newer models even offer features like automatic tracking.  These cameras often come with native network connections for easy integration into your streaming setup.

PTZ cameras such as the ones pictured here, provide most of the same features as the cameras mentioned earlier but are optimised for permanent installation and typically don’t require a dedicated operator.  While the initial cost may be a bit higher, ranging from $3,000 to $5,000, the improvement in streaming quality justifies the investment.

In a church context, the following criteria are important:

  • Traditional churches benefit from high-resolution cameras as they allow you to create multiple views from a single camera feed, ensuring a better user experience.
  • PTZ cameras can use presets and transitions to create smooth scene changes without compromising resolution.
  • Look for cameras with optical zoom, as it delivers better image quality compared to digital zoom.

We trust that this series has been informative. If you have any questions on this topic or are interested in online training for live-streaming church services, please don’t hesitate to reach out to us.

Camera images sourced from the respective manufacturer’s websites. For more product information follow the links below.
Panasonic HC-X1500 | Canon XA60 | Sony FDR-AX43 | PTZ Optics IP20X | Angekis Saber IP20X | Telycam Drive+ N

Peter Lane is Principal Consultant at System Design & Communication Services and has over 30 years of experience with Technology systems.  We invite your questions, suggestions and ideas for articles.  These can be submitted either through the editor or by email to dct@dct.org.nz.  We also operate a website focused on building a community of people interested in improving how we can use technology in churches, located at www.dct.org.nz.   

Auckland skyline and reflection at night with the words "Welcome to Worship Example; Livestreamed Worship at 10:00am" superimposed

Another tip for better Livestreams: Tips for a Seamless Network Connection

Hey there!  If you’re part of a house-of-worship community and you’ve ventured into the world of live streaming, you’re in the right place.  In this article, we’ll explore some simple yet effective tips to improve your live streaming performance, even if you’re not a tech wizard. I hope we can use this info to help you make your virtual gatherings smoother than ever.  If you’ve been following along, you will know that I’ve been doing a series of articles for Touchstone titled “3 Tips for Better Livestreams” – one on Audio, one on Lighting and one on cameras.  This article is a bonus 4th tip for the blog community only.

So now you have optimised your live streaming output with my other tips, we need to transmit the result to your audience in the world outside of your venue.  This is where your network equipment and processing equipment have the most impact on what your audience actually sees and hears.

  1. Know Your Internet Speed: Before we dive into any technical jargon, let’s start with something everyone can relate to; your internet speed.  A reliable live stream begins with a stable internet connection. Check with your Internet Service Provider (ISP) to ensure you have an adequate upload speed.  ISPs will often quote a dual number for speed, like 300/100.  This translates to a download speed of 300Mbps and an upload speed of 100Mbps.  The numbers are nominal, not exact.  For a seamless streaming experience, aim for at least 5-10 Mbps just for streaming, but as in most things Internet, more is better.  It may be worth running the Speed Test tool at https://www.speedtest.net/ to make sure.
  2. Wired Connection Over Wi-Fi: If you’re streaming from your house of worship, try to use a wired Ethernet connection instead of Wi-Fi.  Wired connections are more stable, provide dedicated capacity and are less prone to interference.  If you must use Wi-Fi for any part of your solution, make sure you’re close to your router for a stronger signal.  Where possible, locate the router and other devices so there are no walls or other obstructions between them, as these degrade the signal.
  3. Quality Matters, But Adjust Settings: Full 1080p high-definition streams might be tempting, but they can strain your internet connection.  You can still have great quality with lower settings, like 720p, especially if your audience is using a phone or tablet as their viewing device.  Most streaming platforms offer options to adjust video quality.  Try reducing the video resolution to a lower setting if you experience buffering issues or other quality issues on the audience devices but not at the venue.
  4. Close Unnecessary Applications: Your computer or streaming device may be running background apps that consume bandwidth.  Close unnecessary programs to free up resources for your live stream.  This can make a big difference in performance.  Unleash your inner detective to find and close everything running on your device that isn’t necessary for your livestream.  This might mean moving ancillary applications like presentation software, onto another computer.  This is especially the case where the ancillary application is necessary for the overall service, but not directly contributing to the actual livestream.
  5. Update Your Streaming Software: If you’re using streaming software, keep it updated.  Developers often release updates to improve performance and fix bugs.  Regularly check for updates and install them to ensure a smooth stream.
  6. Consider Hardware Upgrades: If you’re doing live streaming regularly, investing in some hardware upgrades might be beneficial.  Upgrading your computer’s RAM is an option that is particularly helpful or using a dedicated streaming device can help handle the workload more efficiently.
  7. Test Your Setup Before Going Live: Don’t wait until the big day to test your setup.  Do a trial run to make sure everything works as expected.  Check your audio, video, and internet connection.  It’s much easier to troubleshoot issues in advance.
  8. Engage Your Audience: Finally, remember that technology is just a tool.  What truly matters is the relational connection you build with your audience.  Engage with your viewers through comments and chat and make them feel part of the experience.

In the world of live streaming, even those without a technical background can create a smooth and enjoyable experience for their house-of-worship community.  By following these user-friendly tips, you’ll be well on your way to delivering high-quality live streams that bring people closer together, regardless of their age or technical expertise. Soon, the image at the top of this post may well live on you church’s website!  Happy streaming!

Peter Lane is Principal Consultant at System Design & Communication Services and has over 30 years of experience with Technology systems.  We invite your questions, suggestions and ideas for articles.  These can be submitted either through the editor or by email to dct@dct.org.nz.  We also operate a website focused on building a community of people interested in improving how we can use technology in churches, located at www.dct.org.nz.